dmesg - Ubuntu 15.04 with GTX 980
CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.19.0-30-generic (buildd@lcy01-14) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #34-Ubuntu SMP Fri Oct 2 22:08:41 UTC 2015 (Ubuntu 3.19.0-30.34-generic 3.19.8-ckt6)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf77ffff] usable
BIOS-e820: [mem 0x00000000cf780000-0x00000000cf7a2fff] ACPI NVS
BIOS-e820: [mem 0x00000000cf7a3000-0x00000000cf7dffff] ACPI data
BIOS-e820: [mem 0x00000000cf7e0000-0x00000000cf7fffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000042f7fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: Gigabyte Technology Co., Ltd. Z68A-D3H-B3/Z68A-D3H-B3, BIOS F13 03/20/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x42f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CDFFF write-protect
CE000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask F00000000 write-back
1 base 0E0000000 mask FE0000000 uncachable
2 base 0D0000000 mask FF0000000 uncachable
3 base 100000000 mask F00000000 write-back
4 base 200000000 mask E00000000 write-back
5 base 300000000 mask F00000000 write-back
6 base 400000000 mask FC0000000 write-back
7 base 430000000 mask FF0000000 uncachable
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
original variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3584MB, range: 512MB, type UC
reg 2, base: 3328MB, range: 256MB, type UC
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 12GB, range: 4GB, type WB
reg 6, base: 16GB, range: 1GB, type WB
reg 7, base: 17152MB, range: 256MB, type UC
total RAM covered: 16384M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 256MB, type WB
reg 3, base: 4GB, range: 4GB, type WB
reg 4, base: 8GB, range: 8GB, type WB
reg 5, base: 16GB, range: 512MB, type WB
reg 6, base: 16896MB, range: 256MB, type WB
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf780 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f5ae0-0x000f5aef] mapped at [ffff8800000f5ae0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
BRK [0x01fe7000, 0x01fe7fff] PGTABLE
init_memory_mapping: [mem 0x42f600000-0x42f7fffff]
[mem 0x42f600000-0x42f7fffff] page 2M
BRK [0x01fe8000, 0x01fe8fff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x42f5fffff]
[mem 0x420000000-0x42f5fffff] page 2M
init_memory_mapping: [mem 0x400000000-0x41fffffff]
[mem 0x400000000-0x41fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf77ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf77ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[mem 0x100000000-0x3ffffffff] page 2M
BRK [0x01fe9000, 0x01fe9fff] PGTABLE
BRK [0x01fea000, 0x01feafff] PGTABLE
RAMDISK: [mem 0x346d0000-0x3635ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F76D0 000014 (v00 GBT )
ACPI: RSDT 0x00000000CF7A3040 000054 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP 0x00000000CF7A3100 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT 0x00000000CF7A31C0 004DE9 (v01 GBT GBTUACPI 00001000 MSFT 04000000)
ACPI: FACS 0x00000000CF780000 000040
ACPI: MSDM 0x00000000CF7A8100 000055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: HPET 0x00000000CF7A81C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG 0x00000000CF7A8240 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: ASPT 0x00000000CF7A8300 000034 (v07 GBT PerfTune 312E3042 UTBG 01010101)
ACPI: SSPT 0x00000000CF7A8340 0022C8 (v01 GBT SsptHead 312E3042 UTBG 01010101)
ACPI: EUDS 0x00000000CF7AA610 0000C0 (v01 GBT 00000000 00000000)
ACPI: MATS 0x00000000CF7AA6D0 000034 (v01 GBT 00000000 00000000)
ACPI: TAMG 0x00000000CF7AA730 00072A (v01 GBT GBT B0 5455312E BG?? 45240101)
ACPI: APIC 0x00000000CF7A8000 0000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT 0x00000000CF7AAE80 003E74 (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: MATS 0x00000000CF7AED00 00A15A (v01 MATS RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000042f7fffff]
NODE_DATA(0) allocated [mem 0x42f7ed000-0x42f7f1fff]
[ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041ee00000-ffff88042edfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x42f7fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xcf77ffff]
node 0: [mem 0x100000000-0x42f7fffff]
Initmem setup node 0 [mem 0x00001000-0x42f7fffff]
On node 0 totalpages: 4189982
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13214 pages used for memmap
DMA32 zone: 845696 pages, LIFO batch:31
Normal zone: 52192 pages used for memmap
Normal zone: 3340288 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf780000-0xcf7a2fff]
PM: Registered nosave memory: [mem 0xcf7a3000-0xcf7dffff]
PM: Registered nosave memory: [mem 0xcf7e0000-0xcf7fffff]
PM: Registered nosave memory: [mem 0xcf800000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
e820: [mem 0xcf800000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff88042f400000 s87104 r8192 d31680 u262144
pcpu-alloc: s87104 r8192 d31680 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4124491
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16384780K/16759928K available (8004K kernel code, 1234K rwdata, 3764K rodata, 1408K init, 1300K bss, 375148K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3292.578 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.15 BogoMIPS (lpj=13170312)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff81e96000 - ffffffff81e9e000)
ftrace: allocating 30120 entries in 118 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1230 V2 @ 3.30GHz (fam: 06, model: 3a, stepping: 09)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
CPU1 microcode updated early to revision 0x1b, date = 2014-05-29
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2 microcode updated early to revision 0x1b, date = 2014-05-29
#3
CPU3 microcode updated early to revision 0x1b, date = 2014-05-29
#4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (52681.24 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcf780000-0xcf7a2fff] (143360 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 19:03:37, date: 10/21/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff]
pci 0000:00:00.0: [8086:0158] type 00 class 0x060000
pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbff8000-0xfbffbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c00] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io 0xff00-0xff07]
pci 0000:00:1f.2: reg 0x14: [io 0xfe00-0xfe03]
pci 0000:00:1f.2: reg 0x18: [io 0xfd00-0xfd07]
pci 0000:00:1f.2: reg 0x1c: [io 0xfc00-0xfc03]
pci 0000:00:1f.2: reg 0x20: [io 0xfb00-0xfb0f]
pci 0000:00:1f.2: reg 0x24: [io 0xfa00-0xfa0f]
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbffc000-0xfbffc0ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
pci 0000:00:1f.5: [8086:1c08] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0xf800-0xf807]
pci 0000:00:1f.5: reg 0x14: [io 0xf700-0xf703]
pci 0000:00:1f.5: reg 0x18: [io 0xf600-0xf607]
pci 0000:00:1f.5: reg 0x1c: [io 0xf500-0xf503]
pci 0000:00:1f.5: reg 0x20: [io 0xf400-0xf40f]
pci 0000:00:1f.5: reg 0x24: [io 0xf300-0xf30f]
pci 0000:01:00.0: [10de:13c0] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xf9000000-0xf9ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x1c: [mem 0xee000000-0xefffffff 64bit pref]
pci 0000:01:00.0: reg 0x24: [io 0xdf00-0xdf7f]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfaffc000-0xfaffffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [io 0xee00-0xeeff]
pci 0000:03:00.0: reg 0x18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:04:00.0: [1283:8892] type 01 class 0x060401
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 04-05] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:00:1c.6: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:05:01.0: [1814:0201] type 00 class 0x028000
pci 0000:05:01.0: reg 0x10: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
pci 0000:04:00.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
pci 0000:06:00.0: reg 0x10: [mem 0xfbef8000-0xfbefffff 64bit]
pci 0000:06:00.0: supports D1 D2
pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xfbe00000-0xfbefffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf780000-0xcfffffff]
e820: reserve RAM buffer [mem 0x42f800000-0x42fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0290-0x029f] has been reserved
system 00:00: [io 0x0800-0x0805] has been reserved
system 00:00: [io 0x0290-0x0294] has been reserved
system 00:00: [io 0x0880-0x088f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:03: [io 0x0400-0x04cf] could not be reserved
system 00:03: [io 0x04d2-0x04ff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1100-0x117f] has been reserved
system 00:04: [io 0x1180-0x11ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
system 00:05: [io 0x0454-0x0457] has been reserved
system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:06: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x000cee00-0x000cffff] has been reserved
system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:07: [mem 0xcf780000-0xcf7dffff] could not be reserved
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x00100000-0xcf77ffff] could not be reserved
system 00:07: [mem 0xcf7e0000-0xcf7fffff] has been reserved
system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:07: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:07: [mem 0xfed20000-0xfed8ffff] could not be reserved
system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
system 00:07: [mem 0x000e0000-0x000effff] has been reserved
system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
system 00:07: [mem 0x40000000-0x400fffff] could not be reserved
system 00:07: [mem 0xcf800000-0xcfffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa07ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xf9000000-0xfaffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 03]
pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci 0000:04:00.0: PCI bridge to [bus 05]
pci 0000:04:00.0: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.6: PCI bridge to [bus 04-05]
pci 0000:00:1c.6: bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.7: PCI bridge to [bus 06]
pci 0000:00:1c.7: bridge window [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:00: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xf9000000-0xfaffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:04: resource 9 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 4 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:05: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:05: resource 6 [io 0x0d00-0xffff]
pci_bus 0000:05: resource 7 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 8 [mem 0x000c0000-0x000dffff]
pci_bus 0000:05: resource 9 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:05: resource 10 [mem 0xd0000000-0xfebfffff]
pci_bus 0000:06: resource 1 [mem 0xfbe00000-0xfbefffff]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 4 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 29248K (ffff8800346d0000 - ffff880036360000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xcb780000-0xcf780000] (64MB) mapped at [ffff8800cb780000-ffff8800cf77ffff]
RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x1b
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1445454217.552:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 19
ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
ata4: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 1
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb1: SerialNumber: 0000:06:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.19.0-30-generic xhci-hcd
usb usb2: SerialNumber: 0000:06:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 4 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbffe000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: EHCI Host Controller
usb usb3: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 4 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbffd000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 3.19.0-30-generic ehci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
i8042: If AUX port is really absent please use the 'i8042.noaux' option
usb 1-2: new full-speed USB device number 2 using xhci_hcd
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
Intel P-state driver initializing.
Consider also installing thermald for improved thermal control.
ledtrig-cpu: registered to indicate activity on CPUs
PCCT header not found.
ACPI PCC probe failed.
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 08411dd668c266d59a96c625b3012497b2351542'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 3:133:92
container: hash matches
rtc_cmos 00:01: setting system clock to 2015-10-21 19:03:38 UTC (1445454218)
ata3: SATA link down (SStatus 0 SControl 300)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 3-1: new high-speed USB device number 2 using ehci-pci
usb 4-1: new high-speed USB device number 2 using ehci-pci
usb 1-2: New USB device found, idVendor=1532, idProduct=0032
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2: Product: Razer Ouroboros
usb 1-2: Manufacturer: Razer
usb 3-1: New USB device found, idVendor=8087, idProduct=0024
usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 6 ports detected
usb 4-1: New USB device found, idVendor=8087, idProduct=0024
usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 8 ports detected
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
ata4.00: configured for UDMA/100
usb 3-1.3: new high-speed USB device number 3 using ehci-pci
usb 4-1.5: new full-speed USB device number 3 using ehci-pci
ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-9: ST3000DM001-1ER166, CC25, max UDMA/133
ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: ATA-8: Corsair Neutron GTX SSD, M311, max UDMA/133
ata2.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: HPA detected: current 1465147055, native 1465149168
ata2.01: ATA-7: SAMSUNG HD753LJ, 1AA01113, max UDMA7
ata2.01: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3000DM001-1ER1 CC25 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
usb 3-1.3: New USB device found, idVendor=05e3, idProduct=0607
usb 3-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1.3: Product: USB2.0 Hub
hub 3-1.3:1.0: USB hub found
hub 3-1.3:1.0: 4 ports detected
ata2.01: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA Corsair Neutron M311 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/223 GiB)
scsi 1:0:1:0: Direct-Access ATA SAMSUNG HD753LJ 1113 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:1:0: [sdc] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
sd 1:0:1:0: Attached scsi generic sg2 type 0
sd 1:0:1:0: [sdc] Write Protect is off
sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] Attached SCSI disk
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
sr 3:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 sdc7 > sdc4
sd 1:0:1:0: [sdc] Attached SCSI disk
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1408K (ffffffff81d36000 - ffffffff81e96000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 176K (ffff8800017d4000 - ffff880001800000)
Freeing unused kernel memory: 332K (ffff880001bad000 - ffff880001c00000)
random: systemd-udevd urandom read with 25 bits of entropy available
usb 4-1.5: config 1 has an invalid interface number: 3 but max is 2
usb 4-1.5: config 1 has an invalid interface number: 3 but max is 2
usb 4-1.5: config 1 has an invalid interface number: 3 but max is 2
usb 4-1.5: config 1 has an invalid interface number: 3 but max is 2
usb 4-1.5: config 1 has no interface number 2
usb 4-1.5: New USB device found, idVendor=1852, idProduct=50d0
usb 4-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.5: Product: FiiO USB DAC-E17
usb 4-1.5: Manufacturer: FiiO
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018ae000, 50:e5:49:3a:56:e8, XID 0c900800 IRQ 26
r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Razer Razer Ouroboros as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb1/1-2/1-2:1.0/0003:1532:0032.0001/input/input3
hid-generic 0003:1532:0032.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Ouroboros] on usb-0000:06:00.0-2/input0
input: Razer Razer Ouroboros as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb1/1-2/1-2:1.1/0003:1532:0032.0002/input/input4
tsc: Refined TSC clocksource calibration: 3292.521 MHz
hid-generic 0003:1532:0032.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Ouroboros] on usb-0000:06:00.0-2/input1
input: Razer Razer Ouroboros as /devices/pci0000:00/0000:00:1c.7/0000:06:00.0/usb1/1-2/1-2:1.2/0003:1532:0032.0003/input/input5
hid-generic 0003:1532:0032.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer Ouroboros] on usb-0000:06:00.0-2/input2
input: FiiO FiiO USB DAC-E17 as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/0003:1852:50D0.0004/input/input6
hid-generic 0003:1852:50D0.0004: input,hidraw3: USB HID v1.00 Device [FiiO FiiO USB DAC-E17] on usb-0000:00:1d.0-1.5/input0
usb 3-1.3.1: new low-speed USB device number 4 using ehci-pci
usb 3-1.3.1: New USB device found, idVendor=046d, idProduct=c22b
usb 3-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.1: Product: G110 G-keys
usb 3-1.3.1: Manufacturer: LOGITECH
input: LOGITECH G110 G-keys as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3.1/3-1.3.1:1.0/0003:046D:C22B.0005/input/input7
hid-generic 0003:046D:C22B.0005: input,hiddev0,hidraw4: USB HID v1.00 Keypad [LOGITECH G110 G-keys] on usb-0000:00:1a.0-1.3.1/input0
usbhid 3-1.3.1:1.1: couldn't find an input interrupt endpoint
usb 3-1.3.2: new full-speed USB device number 5 using ehci-pci
usb 3-1.3.2: New USB device found, idVendor=0d8c, idProduct=013c
usb 3-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1.3.2: Product: USB PnP Sound Device
usb 3-1.3.2: Manufacturer: C-Media Electronics Inc.
input: C-Media Electronics Inc. USB PnP Sound Device as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2:1.3/0003:0D8C:013C.0006/input/input8
hid-generic 0003:0D8C:013C.0006: input,hidraw5: USB HID v1.00 Device [C-Media Electronics Inc. USB PnP Sound Device ] on usb-0000:00:1a.0-1.3.2/input3
usb 3-1.3.3: new low-speed USB device number 6 using ehci-pci
usb 3-1.3.3: New USB device found, idVendor=046d, idProduct=c22a
usb 3-1.3.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1.3.3: Product: Gaming Keyboard G110
input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.0/0003:046D:C22A.0007/input/input9
hid-generic 0003:046D:C22A.0007: input,hidraw6: USB HID v1.10 Keyboard [Gaming Keyboard G110] on usb-0000:00:1a.0-1.3.3/input0
input: Gaming Keyboard G110 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3.3/3-1.3.3:1.1/0003:046D:C22A.0008/input/input10
hid-generic 0003:046D:C22A.0008: input,hiddev0,hidraw7: USB HID v1.10 Device [Gaming Keyboard G110] on usb-0000:00:1a.0-1.3.3/input1
Switched to clocksource tsc
floppy0: no floppy controllers found
work still pending
EXT4-fs (sdc7): INFO: recovery required on readonly filesystem
EXT4-fs (sdc7): write access will be enabled during recovery
random: nonblocking pool is initialized
EXT4-fs (sdc7): recovery complete
EXT4-fs (sdc7): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (276) killed by TERM signal
Adding 3579900k swap on /dev/sdc5. Priority:-1 extents:1 across:3579900k FS
EXT4-fs (sdc7): re-mounted. Opts: errors=remount-ro
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc4): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
wmi: Mapper loaded
EDAC MC: Ver: 3.0.0
EDAC ie31200: No ECC support
lp: driver loaded but no devices found
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x000000000000042c-0x000000000000042d (\GP2C) (20141107/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
it87: Found IT8728F chip at 0x290, revision 1
it87: Beeping is supported
ppdev: user-space parallel port driver
gpio_ich: GPIO from 436 to 511 on gpio_ich
[drm] Initialized drm 1.1.0 20060810
snd_hda_intel 0000:01:00.1: Disabling MSI
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D2: mono: mono_out=0x0
sound hdaudioC0D2: dig-out=0x11/0x1e
sound hdaudioC0D2: inputs:
sound hdaudioC0D2: Rear Mic=0x18
sound hdaudioC0D2: Front Mic=0x19
sound hdaudioC0D2: Line=0x1a
sound hdaudioC0D2: CD=0x1c
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver snd-usb-audio
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2560, rf: 0003, rev: 0004
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
audit: type=1400 audit(1445454235.787:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=805 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=805 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=805 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=805 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=837 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=804 comm="apparmor_parser"
audit: type=1400 audit(1445454235.787:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=804 comm="apparmor_parser"
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
floppy0: no floppy controllers found
init: Failed to spawn smbd main process: unable to execute: No such file or directory
init: Failed to spawn samba-ad-dc main process: unable to execute: No such file or directory
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 346.96 Sun Aug 23 22:29:21 PDT 2015
init: avahi-cups-reload main process (904) terminated with status 1
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: failsafe main process (859) killed by TERM signal
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
audit_printk_skb: 114 callbacks suppressed
audit: type=1400 audit(1445454241.923:50): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/mysqld" pid=1495 comm="apparmor_parser"
r8169 0000:03:00.0 eth0: link up
init: winbind main process (1896) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1906) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1908) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1910) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1912) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1914) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1916) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1918) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1920) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1922) terminated with status 127
init: winbind main process ended, respawning
init: winbind main process (1924) terminated with status 127
init: winbind respawning too fast, stopped
init: gdm main process (1948) killed by TERM signal
systemd-logind[1903]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[1903]: Watching system buttons on /dev/input/event0 (Power Button)
systemd-logind[1903]: New seat seat0.
init: Failed to spawn nmbd main process: unable to execute: No such file or directory
systemd-logind[1903]: Failed to start user service: Unknown unit: user@134.service
systemd-logind[1903]: New session 1 of user sddm.
vboxdrv: Found 8 processor cores.
vboxdrv: fAsync=0 offMin=0x1a1 offMax=0x16c8
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.26_Ubuntu (interface 0x001a000a).
vboxpci: IOMMU not found (not registered)
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
device virbr0-nic entered promiscuous mode
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered listening state
virbr0: port 1(virbr0-nic) entered disabled state
systemd-logind[1903]: Failed to start user service: Unknown unit: user@1000.service
systemd-logind[1903]: New session 2 of user ghost.
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.31 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
raid6: sse2x1 9683 MB/s
raid6: sse2x2 11943 MB/s
raid6: sse2x4 14031 MB/s
raid6: using algorithm sse2x4 (14031 MB/s)
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 26790.000 MB/sec
Btrfs loaded
EXT4-fs (sdc3): unable to read superblock
EXT4-fs (sdc3): unable to read superblock
EXT4-fs (sdc3): unable to read superblock
FAT-fs (sdc3): invalid media value (0xde)
FAT-fs (sdc3): Can't find a valid FAT filesystem
XFS (sdc3): Invalid superblock magic number
FAT-fs (sdc3): invalid media value (0xde)
FAT-fs (sdc3): Can't find a valid FAT filesystem
MINIX-fs: unable to read superblock
attempt to access beyond end of device
sdc3: rw=16, want=3, limit=2
hfsplus: unable to find HFS+ superblock
qnx4: no qnx4 filesystem (no root dir).
ufs: You didn't specify the type of your ufs filesystem
mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...
>>>WARNING>WARNING